Sumner 2416 Portable Material Hoist


The Sumner 2416 lift is the ideal lift for any contractor – HVAC contractors, electrical contractors, industrial maintenance, steel erectors, and facility management. The lift is easy to use with just one operator. 

Plunger pins are used to lock the legs in place and adjust the fork position to either up or down. The winch rotates easily and raises the lift 1 foot per 8 cranks. 

The Sumner 2416 lifts up to a 200kg capacity. 

The operator can raise the load to a maximum height of 5.2 metres (16' and 11 3/8") with the forks turned up. 

The fork is easily reversed to the lower position with push pins and can lift to 4.9 metres (15' and 11 3/8"). 

While in operation, the lift is a very manageable size. It is 121.9 cm (48") in length, 140.3 cm (55.25") in width. 

The lift folds up so that it can be put away in storage until you need it again, or it can roll into a vehicle and go wherever your work takes you. While stowed, the lift has a height of 159.4 cm (62.8"), length of 58.4 cm (23"), and width of 67.1 cm (26.4"), which makes it a compact size that fits in most trucks.



Series 2416 Contractor Lift Dimensions
Height max. (forks up) - 5.2 m (16' 11-3/8")

Height max. (forks down) - 4.9 m (15' 11-5/8")

Lift capacity - 200.0 kg
Height stowed - 159.4 cm (63")

Length stowed - 58.4 cm (23") 

Length operating - 121.9 cm (48") 

Width stowed - 67.1 cm (26.4")

Width operating  -140.3 cm (55.25") 

Basic weight - 110.2 kg


Manufacturers Technical Data Sheet

Registered Address: Littlemoor Mill, Whalley Road, Clitheroe, BB7 1PW 

 Telephone: 01200 411004 - Fax: 01200 429003
 Company Registration Number: 822579


Copyright © 2018 Brian Dent Limited



Website powered by BT