Makita HR4013c Rotary Hammer SDS Max


The Makita HR4013C was developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration. With Rotary Hammer 4.5m/sec and Hammer 5.0m/sec vibration levels it makes this the worlds first 8 hour SDS-MAX rotary hammer.


Features:
One touch sliding chuck for easy bit installation and removal
Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage
"Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body
Unrivalled low level of vibration aided by vibration absorbing housing
LED service light indicates when to replace carbon brush
In hammering mode, on/off switch is switchable between two switches to meet your application: For Continuous or Intermittent chiselling applications


Technical Information:
Impact energy - 8.0 J
Max in concrete - 40 mm
Impacts per minute - 1450 - 2900 ipm
Input Wattage - 1000 w (110v - Transformer Required)
Vibration K factor - 1.5 m/sec²
Net weight - 6.8 - 6.9 kg
No Load Speed - 250 - 500 rpm
Vibration: Chiselling - 4.5 m/sec²
Vibration: Hammer Drilling - 5 m/sec²


Manufacturers Technical Data Sheet

Registered Address: Littlemoor Mill, Whalley Road, Clitheroe, BB7 1PW 

 Telephone: 01200 411004 - Fax: 01200 429003
 Company Registration Number: 822579


Copyright © 2018 Brian Dent Limited



Website powered by BT